Pix Debugging Solution At The Isakmp Encryption Level

Don't suffer from PC errors any longer.

  • 1. Download and install the Restoro software
  • 2. Launch the software and select your language
  • 3. Follow the on-screen instructions to start a scan of your PC
  • Get this complimentary download to improve your computer's performance.

    You should review these troubleshooting tips if you are experiencing the crypto isakmp debug level pix error on your computer.

    Presentation

    This document covers common debugging commands for troubleshooting IPsec issues in Cisco IOS Software? and PIX/ASA. This information assumes that you have configured IPsec. For more information, see Common IPsec Error Messages and Common IPsec Problems as a Result.

    For more information on common solutions to IPsec VPN issues, see Troubleshooting Common L2L and IPsec VPN Remote Access Solutions. It contains general procedures that you can try before you start troubleshooting, reconnecting, and calling Cisco Technical Support.

    Preconditions

    Requirements

    Components Used

    The information in this agreement is based on the following base software and hardware versions:

  • Cisco IOS Software

  • IPsec is enabled.

  • debug crypto isakmp level pix

    56i – indicates the received data encryption standard (DES) that you receive (in Ci softwaresco IOS version 11.2 and therefore higher).

  • k2 – Indicates Triple DES capability (in Cisco IOS Software Release 12.0 and later). Triple DES is available for Cisco 2600 models and later.

  • PIX – Version 5.0 and later, which requires a single multi-license or DES key to activate.

  • The manual in this generated document is like equipment in a specialized lab environment. All detectors used in this document have been run and one configuration removed (default). If your main network is active, make sure you understand the implications.

    Conditions

    See the Cisco Technical Agreement Procedures for more information about data file conventions.

    Cisco IOS Software Debugging

    themes

    Don't suffer from PC errors any longer.

    Its no secret that computers slow down over time. Restoro will fix common computer errors, protect you from file loss, malware and hardware failure. This software can easily and quickly recognize any Windows related issues and problems. The application will also detect files and applications that are crashing frequently, and allow you to fix their problems with a single click. Your computer is going to feel faster than ever before! Click here now for a free download of the latest version of our software:

  • 1. Download and install the Restoro software
  • 2. Launch the software and select your language
  • 3. Follow the on-screen instructions to start a scan of your PC

  • This section describes the debugging commands for Cisco IOS Software. For more information, see Common IPsec Error Messages and Common IPsec Issues.

    Show Crypto Isakmp Sa

    This command shows mappings b Internet Security Association Management Protocol (ISAKMP) security (SA) created somewhere between peers.

    dst src nation conn-id slot12.1.1.2 12.1.1.1 QM_IDLE 1 0

    show Ipsec Crypto Sa

    This command displays the IPsec SAs hosted between peers. The designed encrypted tunnel is between 12.1.1.1 and 12.1.1.2 for traffic going between cpa marketing networks 20.1.1.0 and 10.1.1.0. You can see both incoming and outgoing Encapsulation Payload (ESP) SAs. The authentication header (AH) is not used as there is currently no AH SA.

    debug crypto isakmp level pix

    This output is for illustration purposes only and shows the crypto show ipsec sa command.

    Interface: FastEthernet0    Cryptographic plan tag: test, local address. 12.1.1.1   local identifier (address/mask/security/port): (20.1.1.0/255.255.255.0/0/0)   Remote ID (address/mask/security/port): (10.1.1.0/255.255.255.0/0/0)   current_peer: 12.1.1.2     ENABLED, flags=origin_is_acl,    #pkts-encaps: 7767918, #pkts-guarantee: 7767918, #pkts-digest 7767918    #pkts decaps: 7760382, #pkts decode: 7760382, #pkts verify 7760382    #pkts withTo: 0, #pkts 0 uncompressed: #pkts less than compressed: 0, #pkts compr. failed: null,   Decompression error #pkts: 0, #send error 1, #receive error 0    Close to Crypto Endpt. : 12.1.1.1, support for Crypto Endpt remote computing. : 12.1.1.2     mtu 1500 path, mtu 1500 speaker     current extroverted spinnaker: 3D3     connected inside esp sas:      Sleep: 0x136A010F (325714191)        Revision: esp-3des esp-md5-hmac,        in usage settings = tunnel,        Location: null, connection id: 3442, stream id: 1443, crypto map: test        sa sync: Left key lifetime (fps): (4608000/52)        IV size: 8 bytes        Read detection support: Yes     entering ah sas:     incoming sas pcp:incoming sas pcp:startup, especially the gateway:   Sleep: 0x3D3(979)    conversion: esp-3des esp-md5-hmac,    in lens settings = tunnel,    Location: 0, Conn-ID: 3443, Flow_id: 1444, Crypto-Map: Test    see time: daily key balance (fps): (4608000/52)    IV size: 8 bytes    Read detection support: Yesleaving my oh my gateway:PCP SAS outbound: 

    Get this complimentary download to improve your computer's performance.

    Depurar Pix De Nivel Isakmp De Criptografia
    Otlazhivat Kriptograficheskij Uroven Isakmp Pix
    Eseguire Il Debug Del Pixel Di Livello Isakmp Della Crittografia
    Depuracion De Imagenes De Nivel De Isakmp Criptografico
    Debuguj Pix Poziomu Krypto Isakmp
    Deboguer Les Pixels De Niveau Crypto Isakmp
    Felsoka Krypto Isakmp Niva Pix
    디버그 암호화 Isakmp 레벨 픽스
    Debuggen Sie Krypto Isakmp Level Pix
    Debug Crypto Isakmp Niveau Pix

    You may also like...